RoboCar Chassis – Programmable Robotics Platform

129.00

RoboCar is a DIY programmable robotics platform for advanced builders. Fully customizable and expandable with Totem modules.

  • Programmable with Arduino;
  • Smartphone app controlled;
  • Powered by RoboBoard X4.

Kit includes:

  • 200+ mechanical parts
  • 1 RoboBoard X4
  • 2 DC motors
  • 1 servo Motor
  • Battery with a charger
  • Tools for assembly

RoboCar wheel base length: 197 mm, wheel tracking length: 175 mm.

Control with your smartphone or tablet

In stock

SKU: TMK-RCC Category:
Weight 1.3 kg
Dimensions 27 × 20 × 9 cm
Free
shipping
EU over 100€
Worldwide over 200€
Customer
care
We are here to help
support@totemmaker.net
Safe
payment
Secure payments via
Paypal or Credit card

Compatible with

Arduino PlatformIO Qwiic

 

Totem RoboBoard X4 is an ESP32 robot development board with integrated Arduino programming and motor drivers. A compact package contains 11.1V battery with charging, DC and Servo motor control, accelerometer and gyroscope, wireless capabilities for remote control and Internet access. More features can be added using available Qwiic connector, TotemBUS port or GPIO pins for custom control and communications.

Documentation: https://docs.totemmaker.net/roboboard-x4/

RoboBoard can be remotely controlled using Totem smartphone app with predefined controls or custom ones for your own project. Application allows to create buttons with variable parameters and intercept them in Arduino code.
All this functionality is integrated into Totem software and enabled with a few lines of code: https://docs.totemmaker.net/roboboard/api/totemapp/

Also, ESP32 enables access to the Internet or even interact with wireless gamepad controllers.

 

Software features

RoboBoard is well integrated with Arduino framework. Most of the features are accessible with single line of code without require for external libraries. Even allows to setup drivetrain algorithms or control motor speed and acceleration. See API specifications: https://docs.totemmaker.net/roboboard/api/

Compatible with Arduino IDE and PlatfomIO. Check for setup instructions: https://docs.totemmaker.net/setup/

 

As it’s a customizable platform, you can upgrade it by adding an add-on top (truck, jeep, race car shape or anything else that you can imagine). Mount the robotic arm, gripper parts, extra motors and/or electronics boards, sensors, Totem modules etc. to expand the possibilities of the RoboCar and give it extra functionality.

The RoboCar wheel base length is 197 mm, wheel tracking length is 175 mm.

RoboBoard is a single board for all robotic needs. It contains some most common features, but can be expanded with additional Qwiic and TotemBUS modules. Even third-party modules works with integrated motor drivers. For custom controls or communications – available GPIO pins can be used (compatible with general Arduino libraries).

Information for interacting with Qwiic and GPIO pins: https://docs.totemmaker.net/roboboard/api/gpio-qwiic/

 

Totem RoboBoard X4

Programmable robotics controller for wireless motor and sensor control

RoboBoard X4 Totem RoboBoard X4

 

Processor:

• ESP32 module (ESP32-D0WD)
• Dual-core 240Mhz (Xtensa LX6)
• 320KB SRAM, 8MB flash
• Wireless connectivity

Board features:

• 3 Servo motor ports (5 Volt)
• 4 DC motor ports (11.1 Volt, 1 Amp)
• 4 GPIO (I2C, UART, SPI, …)
• 4 RGB lights
• IMU sensor (accel and gyro)
• Reset, User buttons
• Status LED
• On/Off switch
• DC power input
• Battery input, integrated charger
• Qwiic port (STEMMA QT compatible)
• TotemBUS (attach Totem modules)
• USB (data only, no power)

Power:

• DC adapter: 30W, 15V, 2A
• Battery: 3S Li-Ion 11.1V 2200mAh

Dimensions:

• 70 x 50 x 14 mm (L x W x H)

Documentation

RoboCar Chassis assembly instructions

RoboBoard X4 documentation

You may also like…